Recently Updated Pages
Safety Information
Exits There are two exterior exits on either side of the woodshop. There are also three exits in...
Woodshop Rules
Proper personal protective equipment is non-negotiable, including Closed toed shoes while in...
Shelving - Single Row Brackets and Standards
Use This Wiki For Parts Ordering or Shelf-Building This wiki aims to help members, volunteers, b...
Foldforming Resources
Foldforming is a metalworking technique developed by Charles Lewton-Brain, known for creating thr...
BMS Music System
Where to find The control interface is located at music.bellinghammakerspace.org. NoteMake sure...
How to set up a digital signboard
The digital sign in the front window area of the makerspace is a 40" commercial display driven by...
Metalsmithing Hammer Use Guide: Steel vs. Brass
✅ Steel Hammer — When to Use Purpose: Used when you need precision force or when working dir...
Spending and Reimbursement
To ensure we're using our shared resources wisely, we've established the following guidelines for...
Security Cameras
To ensure the safety of our members and the security of our shared space and equipment, we use a ...
Closing / Lock-up
Because there are members who use the space at all different times of the day and night, we ask t...
Project Management (draft)
Makerspaces are magical places of infinite possibility, but not places of infinite time or resour...
Where to find it
-- Chapter in progress --- A numbering system (GREEN circles) for drawers, shelves, cabinets, t...
Planer
When to use: This tool is used as a way to make a board true on both faces. This is a useful too...
Cutting and Forming Copper Sheet Metal
Cutting and forming sheet metal can be done with shears, Disk Cutting tools are for cutting and f...
PMC Precious Metal Clay
Requires very clean workspace and toolkits.Due to the expense of working with Precious Metals - B...
Dial Height Gauge
A dial height gauge is used in metalworking and precision machining to measure vertical distances...
Kiln Fired annealing on Copper
Torch Fired Annealing on Copper
Chasing and Repousse Tools
Pitch PotsRepousse Chasing Needs Safety training
Foldforming Tools
Foldforming is a metalworking technique developed by Charles Lewton-Brain, known for creating thr...