3D Printers

Printers and Capabilities

Ender 3

The Ender 3 has a 235mm x 235mm x 250mm print volume. The CR-30 has a 200mm x 180mm x infinite print volume. It’s an FDM Printer capable of printing PLA, PETG, and Flexible Filament* (depending on print settings). It cannot print ASA, ABS, PolyCarbonate, or Nylon.

CR-10

The Ender CR-10 has a 500mm³ print volume. It's an FDM Printer capable of printing PLA, PETG, and Flexible Filament* (depending on print settings). It cannot print ASA, ABS, PolyCarbonate, or Nylon. It is perfect for printing larger items that cannot fit on an Ender 3.  

Before printing with the printer, see the staff for more assistance. This printer requires more preparation time and attention to detail to ensure good-quality print.

Setting  Range
Speed  25-50m/s (Max)
Extrude Temp Range 200-250c° 
Bed Temp Range 0-55c°

 

 

CR-30

The CR-30 has a 200mm x 180mm x infinite print volume. It’s an FDM Printer of prints of PLA, PETG, and Flexible Filament* (depending on print settings). It cannot print ASA, ABS, PolyCarbonate, or Nylon. It is perfect for printing long continuous items that cannot fit in the print volume of a traditional printer. 

Like the CR-10, Please see the staff before operating this machine.  

The CR-30 needs to be leveled before it operates otherwise the print will fail.

 

logo-mobile.png

This machine is sliced using ideaMaker not Cura or PrusaSlicer